This DAB Bronze VS 65/150 Class F Hot Water Circulating Pump is for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems.

– Single body consisting of the cast iron hydraulic section and the wet rotor motor.
– Die-cast aluminium motor casing.
– Technopolymer impeller.
– Tempered stainless steel motor shaft on graphite bushings lubricated by the pumped liquid.
– Stainless steel rotor liner, stator liner and closing flange.
– Ceramic thrust ring, silicon seal rings, and brass air breather plug.
– The wet rotor asynchronous two-pole motor is protected as far as resistance
– Does not require overload protection.
– Three-speed operation.
– Protection class: IP 44, Insulation class: F, Cable gland: PG 11, Installation: with horizontal motor axis.
– Standard voltage: single-phase 230 V / 50 Hz

DAB Bronze VS 65/150 Class F Hot Water Circulating Pump 60185007H Specification :

– Manufacturer Product Number : 60185007H
– Model No : VS 65/150
– Operating range: from 0,6 a 3,7 m3 /h with head of up to 6 metres.
– Pumped liquid temperature range: from -10 C to +85 C for sanitary uses, and +110 C for other uses. To avoid the formation of calcium, do not exceed 65 C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.
– Pumped liquid: clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%).
– Maximum operating pressure: 10 bar (1000 kPa).
– Minimum suction pressure: the values are shown in the corresponding tables.
– Installation: with HORIZONTAL MOTOR AXIS.
– Special executions on requests: alternative voltages and frequencies.
– Weight : 2.600000
– Manufacturers Warranty : 1 Year (Subject to Manufacturers T&C’s)