DWBi 25kW, wood boiler for central heating, wood waste incinerator.

With access to wood and wood waste products or timber offcuts, can you afford not to use them and keep your home or workplace warm at a fraction of a cost?

Fan assisted combustion and a large fire box give DWBi 25kW multi fuel boiler better control over fire efficiency, faster temperature build up and a more complete and longer burn times.

25kW boiler has sufficient output to heat a home or a workplace with a total square area of around 220m2 it will also provide consumable hot water, can be plumbed in open vented or closed central heating system.

The DWBi range can also be used with ourbuffer tanksand our hot air blowing fan radiators.

Please also consider our thermal relief valve, designed to release hot water and refill the boiler with cold water shall an emergency situation arise.

For full product video please click HERE.

For DWBi full product page please click HERE.

Manufactured out of EN specification 6-7 mm steel plates, laser cut and welded internally.

An electrical supply is needed, albeit very low consumption, DWBi boilers can also work with no electricity.

Fill up, light it and walk away system thanks to electronic controller keeping a watch full eye over combustion parameters and temperature control.

Refills vary with boiler output as does fire box size, but expected burn time, using coal or wood, to be 3-4 hours for smaller units and up to 8-12 hours on bigger machines.

As with the rest of our items this wood boiler is a 100 % European product.

Please Note

Shape or size may vary slightly as products evolve and are constantly updated.

If you have any questions regarding this or any other product, please get in touch. Details are on ‘Contact us’ page.